Splitter Argb Fan
I 10 migliori prodotti di ottobre 2024
Ultimo aggiornamento:
15 ottobre 2024
QWORK
QWORK® Cavo splitter ARGB, 5 V, 3 pin, splitter argb, 1 presa su 3 spine, 30 cm, per dissipatore CPU e ventola ARGB 5 V
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Splitter ARGB e cavo di prolunga: converte un header LED RGB indirizzabile a 3 pin 5V in tre header LED RGB indirizzabili a 3 pin 5V.
Lunghezza cavo 30 cm: le estremità dei cavi durevoli offrono flessibilità per una facile gestione dei cavi.
Facile da installare: dotato di perni maschi. Nessuna saldatura, nessuna installazione di strumenti, risparmia tempo. collega e usa
Materiale di alta qualità: il cavo è realizzato in morbido materiale PVC, ben rivestito e avvolto, fornendo prestazioni durature e prevenendo polvere e rotture.
Nota: sono supportate solo le intestazioni della scheda madre RGB indirizzabili a 3 pin 5V.
6,99 € SU AMAZON
TZMRIT
TZMRIT ARGB PWM Fan Hub, Addressable 5V 3Pin ARGB & 12V 4Pin PWM 2-in-1 RGB Case Fan Hub with Hidden Magnetic Base and SATA Power 18 Port, Support 9 Computer Fan CPU Splitter
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
L'hub della ventola può supportare fino a nove ventole, tra cui un totale di nove porte PWM a 4 pin e 9 porte ARGB per ventole ARGB o dispositivi ARGB.
La velocità della ventola può essere regolata tramite il segnale PWM della scheda madre e il sistema può leggere solo la velocità di "Fan 1". La funzione di controllo della velocità non è applicabile alla ventola a 3 pin e la ventola a 3 pin collegata funziona alla massima velocità.
Supporta la sincronizzazione della scheda madre 12 V RGB/5 V ARGB commutando un piccolo interruttore per sincronizzare due sistemi di illuminazione, compatibile con AURA, RGB Fusion, Mystic Light e Polychrome. Non esiste una modalità colore integrata e il cavo di sincronizzazione deve essere collegato alla testa della scheda madre.
Connettori ARGB (3 pin) fino a 9 pin per collegare altri dispositivi per creare il proprio sistema di illuminazione e supportare fino a 200 LED.
PCB di alta qualità, molto resistente, con velcro, facile da collegare hub al telaio, alimentatore SATA può mantenere prestazioni stabili anche a pieno carico.
13,99 € SU AMAZON
YACSEJAO
YACSEJAO Cavo splitter ARGB 5 V 3 pin indirizzabile RGB 1 a 4 cavo splitter con pin maschio per telaio del computer, raffreddamento CPU e ventola ARGB da 5 V
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Funzione: il cavo splitter ARGB consente di estendere e collegare la ventola ARGB LED o ARGB indirizzabile tramite una singola scheda madre + 5 V 3 pin ARGB header.
Ampia gamma di usi: cavo splitter ARGB compatibile con schede madri RGB indirizzabili ASUS, MSI, GIGABYTE e ASROCK.
Facile da installare: dotato di perni maschio. Nessuna saldatura, installazione senza attrezzi, consente di risparmiare tempo. Assicurarsi che la freccia alla freccia, plug and play
Materiali di qualità: utilizzando morbido materiale in PVC, il cavo è saldamente avvolto e avvolto per fornire prestazioni di lunga durata ed evitare polvere e rotture.
Nota: supporta solo 3 pin 5 V indirizzabile scheda madre rgb, non supporta intestazione RGB a 4 pin 12 V.
9,99 € SU AMAZON
TZMRIT
TZMRIT ARGB Controller per PC RGB, splitter ARGB, controller per fan SATA Power RGB, 14 tasti Remote Control Switch Colours RGB Fan Hub
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Controller ARGB 5V 3pin: questo controllo della ventola Argb PC ha una modalità effetto di illuminazione integrata collegata all'interfaccia SATA del telaio per l'alimentazione supporta tutti i modelli PSU che entrano nella porta SATA.
Facile da usare: installare gli strumenti gratuitamente, collegare e utilizzare, accendere l'illuminazione tramite telecomando molto comodamente, 215 modalità di illuminazione dinamica e 4 luci statiche di colore.
Sicuro e durevole: il filo di rame di alta qualità viene utilizzato all'interno del cavo per garantire corrente stabile, isolamento sicuro e durevole. Il design piccolo e raffinato è facile da tracciare e nascondere nella custodia.
Telecomando: questo hub argb può controllare manualmente l'effetto di illuminazione o utilizzare il telecomando per ottenere supporto per monocromatico, arcobaleno, luci trotto, salto e altre modalità.
Ampia compatibilità: collegare un lato a 5 V ARGB 3 pin e collegare un altro lato all'alimentazione SATA. Il controller LED rgb può essere utilizzato in ventole RGB, ventole PC, PC RGB, strisce LED per PC, supporto GPU, cavo rgb psu, refrigeratore d'acqua, CPU di raffreddamento CPU, raffreddamento CPU e interfaccia da 5 V 3 PIN
8,99 € SU AMAZON
Jungle Leopard
Jungle Leopard ARGB PWM Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub,Magnetic Suction, SATA Power Cord
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Jungle Leopard is a Chinese Guangdong brand with over 20 years of development, with a certain level of popularity in both domestic and international markets, and a significant influence in the player market. The R&D product line covers products such as CPU air-cooled heat sinks, chassis cooling fans, etc.
The Jungle Leopard JL8 fan hub can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans or ARGB devices.
Jungle Leopard JL8ARGB&PWM 2-in-1 fan hub supports motherboard signal synchronization: fan speed and lighting effects can be synchronized in real-time to the motherboard for free control
Magnetic suction quick fixing design: The hidden built-in magnet can be attached to the iron metal inside the chassis, and the surface can freely change position. Bringing more freedom to the internal wiring of the chassis, making it easier and neater to manage the wiring inside the chassis
SATA power interface design: Stable power interface, capable of continuous and reliable output during full load operation
Product parameters: Product name: Jungle Leopard JL8ARGB&PWM 2-in-1 Hub; Size: 133 * 48 * 14.3mm; Fan PWM ports: 8 (4Pin); PWM rated voltage: 12V; Light interface: 8 (3-pin ARGB); Rated voltage of lighting: 5V; Power interface: SATA; Power supply safety current: 4.5A; Fixed mode: magnetic suction
Note:+12V 4Pin RGB interface devices do not support it! Do not insert! Please pay attention to the arrow marked on the ARGB device plug and insert it in the 5V direction. Incorrect insertion direction poses a risk of damaging the device
9,99 € SU AMAZON
TZMRIT
TZMRIT 2-IN-1 ARGB PWM Fan Hub con controller, 9 connettori PWM a 4 pin, 9 porte ARGB da 5 V, 3 pin, base magnetica e alimentazione SATA 18, bianco
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Aspetto personale, design multi-interfaccia, 9 interfacce di controllo della temperatura 4IPN e 9 x 5 V 3 pin ARGB espansione, che migliorano notevolmente la capacità.
Ci sono molte modalità che corrispondono al tuo stile e la modalità di controllo remoto ha più di 360 tipi di effetti luminosi. Anche se la scheda madre non supporta la sincronizzazione 5V, ci sono molti modi per giocare con la modalità remota.
Design con sfondo magnetico. La parte inferiore del controller adotta un design ad assorbimento magnetico di grandi dimensioni, che rende l'installazione molto semplice.
Supporta 5V AURA ARGB Sync per schede madri come ASUS, MSI, Gigabyte, ASRock, ecc.
Il controller è dotato di un telecomando wireless e puoi passare liberamente dalla modalità scheda madre alla modalità di controllo remoto
16,99 € SU AMAZON
QIMEI-SHOP
Hub Argb 5V 3Pin RGB LED Splitter Fan Hub da 1 a 11 Porte con Porta SATA per Computer PWM Fan
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Hub ARGB a 11 porte: L'interfaccia RGB è estesa fino a 11 porte, consentendo di controllare in modo sincrono più canali di fan RGB.
Facile da installare: C'è nastro autoadesivo sul retro e un foro per vite di montaggio nel mezzo della scheda, rendendo l'installazione più flessibile.
Risparmio di spazio: portatile e compatto, il mozzo può efficacemente risparmiare spazio, facilitare la gestione del cavo e mantenere pulito l'interno del telaio.
Nota: Questo hub è compatibile solo con testine o controller RGB a 3 pin 5V indirizzabili. Non collegare un componente RGB 12V a 4 pin.
Confezione: 1 hub ARGB, dotato di un normale cavo di collegamento a 3 pin. Nota: il cavo di alimentazione SATA non è incluso.
9,99 € SU AMAZON
Dasyusuo
Cavo di Alimentazione RGB, 2 Pcs Cavo Splitter per Ventola per Alloggiamento, Cavo Splitter per Ventola 1 a 5 per Computer e Ventola di Raffreddamento del Processore e Cavo di Alimentazione a 3 Pin
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
CAVO DI ALIMENTAZIONE RGB: Questo Cavo dell'adattatore dello splitter della ventola è installato nella ventola RGB / ARCB del computer, che può dividere il segnale di potenza da 5 pezzi. È possibile collegare 5 strisce LED RGB a un singolo controller per controllare il colore.
MATERIALI DI ALTA QUALITÀ: Il Cavo Splitter per Ventola Raffreddamento è realizzato in PVC di alta qualità e plastica in rame, resistente e resistente alla corrosione. La plastica PVC ha un buon isolamento e un'elevata resistenza a temperature elevate ed è più sicura, mentre il rame ha una buona conduttività elettrica per aiutare un lavoro migliore.
FLESSIBILE E PRATICO: Il cavo di alimentazione per ventola ha una buona flessibilità, può essere piegata arbitrariamente e non è facile da rompere. È lungo circa 50 cm, è facile da filo e più conveniente e veloce da usare.
AMPIA GAMMA DI APPLICAZIONI: Il cavo dello splitter da 1 a 5 supporta il cavo di sincronizzazione LED RGB indirizzabile a 3 pin, ideale per mappe di Asus, MSI, Gigabyte e Asrock. È una scelta ideale per gli appassionati di computer.
OTTERRETE: Un set contiene 2 cavo splitter per ventola e il distributore non supporta 12V RGB, solo 5V RGB. I cavi di divisione utilizzano il classico nero, che è facile da abbinare al tuo computer e non facile da sporcare. Può rendere il tuo computer più fresco e personalizzato.
10,89 € (5,44 € / unità) SU AMAZON
GINTOOYUN
GINTOOYUN 2 cavi splitter ARGB da 5 V, 3 pin, indirizzabili, cavo splitter RGB a 3 pin, cavo adattatore femmina per PC LED, 5 V, ARGB fan, computer telaio (11,8 pollici) (stile 2)
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Cavo splitter ARGB femmina da 1 a 3, consente di espandere e collegare il suo LED ARGB indirizzabile o la ventola ARGB attraverso una singola scheda madre +5V 3-pin ARGB header.
Connettore A: 1 femmina a 3 poli, connettore B: 3 femmina, SM 3 poli, tensione: 5 V; lunghezza cavo: 30 cm (nota: compresa la lunghezza del connettore).
Questo cavo RGB è realizzato in PVC isolante di alta qualità con buona resistenza alla corrosione. Il cavo contiene un nucleo in rame puro all'interno, buona conduttività, morbido e resistente, non facile da rompere.
I nostri cavi ARGB sono dotati di una presa a 3 pin per una facile installazione, nessuna saldatura necessaria, solo assicurarsi che la freccia sia corretta per la freccia.
Contenuto della confezione: 2 x 1 a 3 cavi ARGB femminili; 2 x connettori maschio a 3 pin (nota: questo prodotto è solo per connettori a 3 pin, non supporta 12 V RGB solo 5 V RGB)
11,99 € SU AMAZON
YACSEJAO
YACSEJAO ARGB - Cavo splitter da 5 V a 3 pin indirizzabile RGB da 1 a 3 con pin maschio per telaio del computer, dispositivo di raffreddamento CPU e ventola ARGB da 5 V
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Funzione: il cavo splitter ARGB permette di estendere e collegare la ventola ARGB LED o ARGB indirizzabile tramite una singola scheda madre +5V 3 pin ARGB.
Ampia gamma di usi: cavo splitter ARGB compatibile con schede madri RGB indirizzabili ASUS, MSI, GIGABYTE e ASROCK.
Facile da installare: dotato di perni maschili. Nessuna saldatura, installazione senza attrezzi, risparmia tempo. Assicurarsi freccia per freccia, plug and play
Materiali di qualità: utilizzando materiale in PVC morbido, il cavo è saldamente avvolto e avvolto per fornire prestazioni di lunga durata ed evitare polvere e rotture.
Nota: supporta solo l'intestazione della scheda madre rgb indirizzabile a 3 pin 5V, non supporta l'intestazione RGB a 4 pin.
9,99 € SU AMAZON
argb fan splitter
fan splitter
splitter fan
argb splitter
splitter argb
argb fan
fan argb
fan splitter pwm
pwm fan splitter
splitter pwm fan