Spi Uart
I 10 migliori prodotti di ottobre 2024
Ultimo aggiornamento:
17 ottobre 2024
DollaTek
DollaTek CH341A Adattatore da USB a UART/IIC/SPI/Ttl/ISP Adattatore Parallelo EPP/Mem
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Supporta l'USB alla porta parallela della stampante e alla porta parallela di EPP o MEM
Supporta USB a UART, I2C, interfaccia SPI
La tensione di uscita e il livello del segnale possono essere selezionati da 3,3 V o 5 V.
Hanno una spia di stato di lavoro UART e SPI / I2C
9,99 € SU AMAZON
DollaTek
DollaTek SC16IS750 UART Singolo con interfaccia I2C-Bus/SPI
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
SC16IS750 è un'interfaccia I2C-bus / SPI slave ad un UART ad alte prestazioni a singolo canale. Offre velocità di trasmissione dati fino a 5 Mbit / se garantisce basse correnti operative e di sospensione.
SC16IS750 e SC16IS760 forniscono inoltre l'applicazione con 8 pin I / O programmabili aggiuntivi.
Il dispositivo è disponibile in pacchetti HVQFN24, TSSOP24 (SC16IS750) di dimensioni molto ridotte, che lo rendono ideale per le applicazioni portatili a batteria.
Questa famiglia di prodotti consente la conversione del protocollo senza interruzioni da bus I2C o SPI a e RS-232 / RS-485 e sono completamente bidirezionali.
8,99 € SU AMAZON
LUCKFOX
LUCKFOX-Pico-Plus with Ethernet Port -RV1103 Linux Micro Development Board,with ARM Cortex-A7/RISC-V MCU/NPU/ISP,16Bit DRAM DDR2,Support GPIO,UART,SPI,I2C,USB,with Camera Interface&Micro TF Card Slot
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
[Powerful Processing Capability] LUCKFOX Pico Plus(with Ethernet Port) is equipped with a highly integrated IPC vision processor SoC, RV1103 chip, featuring a single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. With a built-in NPU supporting INT4/INT8/INT16 mixed operations, it delivers a remarkable computing power of up to 0.5TOPs
[Advanced Image Processing] The Development Board features a new hardware-based ISP that supports a range of Algorithm Accelerator, including HDR, 3A, LSC, 3DNR, 2DNR, sharpening, and gamma correction. This enables enhanced image quality and correction, making it ideal for various AI-related applications.(The Self-developed third-generation ISP3.2 supports 4 megapixels with multiple image enhancement and correction algorithms such as HDR, WDR, and multi-level noise reduction)
[High-performance Encoding] LUCKFOX Pico offers powerful encoding performance with intelligent encoding mode and adaptive stream saving for optimized bit rate. By saving more than 50% of bit rate compared to conventional CBR mode, it ensures high-definition images with smaller file sizes, effectively doubling the storage space
[Versatile Application Scenarios] This Development Board is designed for a wide range of applications, such as smart home devices, industrial automation devices, robots and drones, intelligent surveillance devices, intelligent transportation devices, and intelligent medical devices. Its versatility makes it suitable for various AI application scenarios
[Developer-Friendly] LUCKFOX Pico supports multiple interfaces, including GPIO, UART, SPI, I2C, USB, etc., enabling developers to carry out rapid development and debugging. With built-in 16-bit DRAM DDR2, POR, audio codecs, MAC PHY, and RISC-V MCU, it ensures efficient memory bandwidth, streamlined functionality, and low power consumption
16,99 € SU AMAZON
Fasizi
Fasizi CH341A Adattatore USB a UART/IIC/SPI/TTL/ISP Convertitore parallelo EPP/MEM
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Supporto USB a porta stampante parallela e EPP o MEM porta parallela;
Supporto USB a UART, I2C, interfaccia SPI;
La tensione di uscita e il livello del segnale possono essere selezionati da 3.3V o 5V;
Avere UART e SPI/I2C indicatore di stato di funzionamento;
Il pin 10P_2.54mm è porta di stampa e porta EPP/MEM, la definizione del pin può fare riferimento al manuale.
8,99 € SU AMAZON
Heevhas
Heevhas Dispositivo analizzatore logico USB 24 MHz 8CH 8 canali UART IIC SPI Debug con cavo Mini USB + cavo femmina + set di clip di test colorati da 12 pezzi
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Valore canale】Un totale di 8 canali digitali, è possibile monitorare 8 diversi segnali digitali contemporaneamente. L'intervallo di tensione è compreso tra 0 V e 5,5 V, di cui 1,5 V è la soglia di tensione, sotto 1,5 V è considerato basso, sopra 1,5 V è considerato alto.
【Frequenza di campionamento fino a】24 MHz, può essere 24 MHz. 16 MHz, 12 MHz, 8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 KHz, 250 KHz, 200 KHz, 100 KHz, 50 KHz, 25 KHz.
【Può essere analizzato automaticamente】UART, SPI, IIC e altri debug di comunicazione, in modo da poter ottenere il doppio del risultato con la metà dello sforzo. Frequenza di campionamento di 24 milioni, può analizzare automaticamente UART, IIC, SPI e molti altri protocolli standard.
【Facile da usare】 Analizzatore logico USB: utilizzando un'interfaccia USB, il metodo di installazione e utilizzo è semplice, il funzionamento è conveniente e può soddisfare una varietà di requisiti di utilizzo. Piccolo, ampiamente utilizzato nell'elettronica automobilistica, nelle comunicazioni, nell'energia, nei computer e in altri settori.
【Prestazioni elevate】 La frequenza di campionamento logica di ciascuno degli 8 canali è di 24 M/s, generalmente circa 10 M, sufficiente per varie occasioni.
11,44 € SU AMAZON
Waveshare
Waveshare USB To UART/I2C/SPI/JTAG Converter Supports Multiple Interfaces and Systems Compatible with 3.3V and 5V Multiple Protection Circuits Aluminum Alloy Case Wall-Mount and Rail-Mount Support
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Supports USB to 2-ch UART, or USB to 1-ch UART + 1-ch I2C + 1-ch SPI, or USB to 1-ch UART + 1-ch JTAG. Supports 2-ch high-speed UART interfaces, up to 9Mbps baud rate, with CTS and RTS hardware automatic flow control.
Supports 1-ch I2C interface, for easy operating EEPROM through the host computer or programming I2C devices such as OLED and sensor. Supports 1-ch SPI interface, with 2x chip select signal pins, capable of controlling 2-ch SPI slave devices at different times.
Supports 1-ch JTAG interface, can be used with OpenOCD for debugging and testing (Due to the limited testing of chips and software functions, users need to evaluate and test this function on their own).
Onboard 3.3V and 5V level conversion circuit for switching the operating level of the communication interface, better compatibility. Onboard resettable fuse and ESD protection circuit, provides over-current/over-voltage proof, safe and stable communication.
Aluminium alloy case with oxidation dull-polish surface, CNC process opening, solid and durable, well-crafted. High-quality USB-B and DC connectors, smooth plug & pull, durable and reliable, with anti-reverse protection. Suitable For College Students, Technical Engineers, Electronic Enthusiasts, Or DIY Makers For Learning And Debugging.
24,99 € SU AMAZON
Youmile
Youmile SC16IS752 I2C/SPI MCU-752 Interfaccia bus per scheda di espansione modulo di conversione UART a doppio canale con cavo DuPont con intestazione pin
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Product introduction】: The SC16IS752 is an I2C bus/SPI bus interface that connects to a dual-channel, high-performance UART
【Application】: Providing data rates up to 5 Mbit/s, low operating and sleep currents, and eight additional programmable I/O pins for the application.
【Allow reset】: Allows the software to reset the UART at any time, independent of the hardware reset signal.
【Parameters】: size: 27.2mm*26.4mm*15.5mm; 3.3 V or 2.5 V operation; Baud rate up to 5 Mbit/s in 16× clock mode; Optional I2C bus or SPI interface
【Item Condition】: The module is 100% made of original electronic components, and the product is a brand new product, you can buy it with confidence
11,99 € SU AMAZON
DollaTek
DollaTek CH341A USB a SPI I2C IIC UART TTL ISP Modulo adattatore seriale EPP/MEM Converter Per Spazzola seriale Debug RS232 RS485
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Interfaccia del dispositivo USB a piena velocità, compatibile con USB V2.0, design standard USB-A maschio.
Alimentazione diretta dalla connessione USB al PC.Porta seriale standard analogica, per l'aggiornamento delle periferiche seriali originali o una porta seriale aggiuntiva aumentata tramite USB.
Supporto 3.3V e 5V TTL sistema di destinazione, l'applicazione seriale è pienamente compatibile con il computer sotto il sistema operativo Windows, senza bisogno di modifiche.
Supporta 5, 6, 7 o 8 bit di dati, per supportare parità dispari, anche parità, segni vuoti e nessuna parità.
Supporta la porta seriale per inviare il segnale di controllo e il segnale di collegamento MODEM della velocità di trasmissione e del segnale pronto del ricevitore seriale.
11,99 € SU AMAZON
ICQUANZX
ICQUANZX CJMCU FT232H Modulo Multifunzione ad Alta velocità USB a JTAG UART/FIFO SPI / I2C Module
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
CJMCU-FT232H è compatibile con USB 2.0 Hi-Speed (480 Mb / s) a UART / FIFO IC.USB 2.0 Hi-Speed (480 Mb / secondo) e Full Speed (12 Mb / secondo).
Ha la capacità di essere configurato in una varietà di interfacce seriali o parallele standard del settore.
Intero protocollo USB gestito sul chip. Nessuna programmazione firmware specifica USB richiesta.
Motore seriale sincrono multiprotocollo (MPSSE) per semplificare la progettazione del protocollo seriale sincrono (da USB a JTAG, I2C, SPI (MASTER) o bit-bang).
Velocità di trasferimento dati UART fino a 12 MBaud. (Velocità dati RS232 limitata dal cambio di livello esterno).
16,99 € SU AMAZON
Waveshare
Waveshare PN532 NFC HAT per Raspberry Pi, PN532 Near Field Communication Reader Modulo con I2C/SPI/UART Tre Interfacce di Comunicazione, 13.56 MHz Frequenza Operativa, Supporta varie Schede NFC/RFID
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Power over Ethernet HAT per Raspberry Pi 3 modello B+, 802.3af Power Sourcing Equipment
Il Raspberry Pi Power over Ethernet HAT è un piccolo accessorio per il computer Raspberry Pi Può essere utilizzato solo con Raspberry Pi 3 modello B+ (March 2018).
Il PoE ha la possibilità di alimentare il vostro Raspberry Pi utilizzando le reti di alimentazione collegate alla rete Ethernet per questo prodotto per essere utilizzato, la rete è collegata alle necessità di installare attrezzature di alimentazione.
Alimentazione completamente isolata.
802.3af PoE, 37 – 57 V DC, classe 2, 5 V/2,5 A uscita DC, 25 mm x 25 mm, ventola brushless per ventola di raffreddamento del processor Cooling, controllo del vento.
29,99 € SU AMAZON
uart