Raspberry Pi Lora Hat
I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento:
27 novembre 2024
Waveshare
Waveshare SX1262 LoRa HAT for Raspberry Pi Spread Spectrum Modulation 868MHz Frequency Band Auto Multi-Level Repeating Supports Wireless Parameter Configuration and Fixed-Point Transmission
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for industrial control, smart home, data collection, etc. (Note: This SX1262 868M LoRa HAT uses a private protocol and does not support LoRaWAN. If you need one that supports the LoRaWAN network protocol, please choose Pico-LoRa-SX1262-868M, which can be matched with LoRaWAN gateway SX1302 LoRaWAN Gateway HAT)
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Onboard CP2102 USB TO UART converter, for serial debugging. Brings the UART control interface, for connecting host boards like Arduino/STM32. 4x LED indicators, easy to check the module status. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference.
Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications. Customizable communication key which won't be retrieved, greatly improves the security of user data.
Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment. Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network. Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter. Supports fixed-point transmission, broadcast, signal channel monitor.
35,99 € SU AMAZON
Waveshare
Waveshare SX1262/SX1268 LoRa HAT For Raspberry Pi, UART Interface, Comes with a 433MHz Antenna, Suitable for Industrial manufacturing, Smart home, Smart Farm, Hotel Scheme
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Utilizzando la tecnologia di modulazione dello spettro di diffusione LoRa di nuova generazione, la distanza di comunicazione del modulo è lunga fino a 5 km, supporta anche la ripetizione automatica per trasmettere più a lungo. Altre caratteristiche includono Wake on Radio, configurazione wireless, rilevamento vettore, chiave di comunicazione e così via.
Rispetto ai normali moduli LoRa, SX1268 LoRa HAT raggiunge una distanza di comunicazione più lunga, un tasso più elevato, un consumo più basso, una maggiore sicurezza e anti-interferenza. È adatto per varie applicazioni come controllo industriale, smart home, raccolta dati, ecc.
Standard Raspberry Pi 40PIN intestazione di estensione GPIO, supporta schede della serie Raspberry Pi. Convertitore USB a UART CP2102 integrato, per debug seriale. Porta l'interfaccia di controllo UART, per il collegamento di schede host come Arduino/STM32. 4 indicatori LED, facile da controllare lo stato del modulo. Tecnologia di modulazione dello spettro di diffusione LoRa, fino a 84 canali di segnale disponibili, distanza di comunicazione più lunga, più robusta alle interferenze.
Ripetizione automatica a più livelli, adatta per comunicazioni ultra a lungo raggio, permette la multi rete nella stessa regione. Funzioni a basso consumo energetico come sonno profondo e Wake on Radio, ideali per applicazioni alimentate a batteria. Chiave di comunicazione personalizzabile che non verrà recuperata, migliora notevolmente la sicurezza dei dati utente.
Supporta LBT, monitorando il rumore del canale del segnale prima della trasmissione, migliora notevolmente il rapporto di successo in ambienti estremi. Supporta l'indicazione dell'intensità del segnale RSSI, per valutare la qualità del segnale, accordare la rete. Supporta la configurazione dei parametri wireless, inviando il pacchetto di comandi/dati wireless, configurare o recuperare in remoto il parametro del modulo. Supporta trasmissione a punto fisso, trasmissione, monitor canale di segnale.
33,99 € SU AMAZON
IBest
IBest SX1262 868M Lora Hat Board for Raspberry Pi/Arduino/STM32,Spread Spectrum Modulation Covers 868MHz Frequency Band Support Data Transmission up to 5km Via Serial Port
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band. It allows data transmission up to 5km through serial port.
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer.
Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference.
It is suitable for various applications such as industrial control, smart home, data collection, etc.
34,95 € SU AMAZON
Coolwell
Coolwell Waveshare SX1262 Lora Hat for Raspberry Pi/Arduino/STM32 Spread Spectrum Modulation up to 81 Available Signal Channel 868MHz Frequency Band Allows Data Transmission up to 5km
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards;Onboard CP2102 USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like Arduino/STM32;4x LED indicators, easy to check the module status
LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference;Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications;Customizable communication key which won't be retrieved, greatly improves the security of user data
Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment;Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network; Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter;Supports fixed-point transmission, broadcast, signal channel monitor
Comes with development resources and manual (examples for Raspberry Pi/STM32), download: www.waveshare.com/wiki/SX1262_868M_LoRa_HAT
34,95 € SU AMAZON
Waveshare
Waveshare SX1302 868M LoRaWAN Gateway HAT per Raspberry Pi Modulo L76K Standard Mini PCIe SocketLong Range Trasmissione Supporto multibanda di grande capacità
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Integrates Semtech SX1302/3 banda normale e chip frond-end RF radio SX1250. Onboard PA e LNA, features +26dBm emit power and -141dBm ad alta sensibilità ricezione guadagno
The SX1303 supporta Fine Timestamp e posizionamento in rete in base alla differenza di tempo di arrivo (TDOA).
Presa Mini-PCIe a 52 pin per una facile integrazione in vari sistemi incorporati. Indicatori a bordo 4 LED per lo stato di funzionamento del modulo
Standard Raspberry Pi 40PIN GPIO estensione intestazione, supporta schede della serie Raspberry Pi.
Modulo Incorporate L76K con supporto GPS/BD, fornire informazioni accurate sull'orologio e sulla posizione per il modulo gateway.
131,99 € SU AMAZON
Waveshare
Waveshare SX1262 868/915M LoRaWAN Node Module for Raspberry Pi, with Sucker Antenna, Higher Power Efficiency, Longer Transmission Distance, Suitable for HF band, for LoRaWAN Networks Building
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
[SX1262 868/915M LoRaWAN HAT]Suitable for HF band, comes with a magnetic CB antenna and an IPEX adapter cable
This series of products are LoRa modules using the new generation of SX1262 RF chip, features higher power efficiency, longer communication distance and stronger anti-interference than SX1278
Standard Pi 40PIN GPIO header, compatible with Raspberry Pi series boards
Suitable for Sub-GHz frequency band network, and is available in HF (850~930MHz) frequency band
Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network
24,99 € SU AMAZON
Waveshare
Waveshare SX1262 868M LoRa HAT, Compatible with Raspberry Pi, for Europe/Asia/Africa
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
With standard 40PIN GPIO header, for Raspberry Pi series boards. Onboard USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like STM32; 4x LED indicators, easy to check the module status(Note: This SX1262 868M LoRa HAT uses a private protocol and does not support LoRaWAN. If you need one that supports the LoRaWAN network protocol, please choose Pico-LoRa-SX1262-868M, which can be matched with LoRaWAN gateway SX1302 LoRaWAN Gateway HAT)
LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference; Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications; Customizable communication key which won't be retrieved, greatly improves the security of user data
Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment; Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network
Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter; Supports fixed-point transmission, broadcast, signal channel monitor; Comes with development resources and manual (examples for Raspberry Pi/STM32)
35,99 € SU AMAZON
IBest
IBest SX1268 Lora Hat Board for Raspberry Pi/Arduino/STM32, 433MHz Frequency Band, Spread Spectrum Modulation Support Data Transmission up to 5km Via Serial Port
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer.
Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference.
It is suitable for various applications such as industrial control, smart home, data collection, etc.
33,55 € SU AMAZON
Waveshare
RS485 CAN HAT per Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Consenti Comunicazione Lunga Distanza Tramite RS485/CAN Funzione, Integrato MCP2515 CAN Controller con Chip SN65HVD230 e SP3485
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
19,52 € SU AMAZON
Waveshare
Waveshare SX1262 868/915M LoRaWAN Node Module, LoRaWAN/GNSS Expansion Board for Raspberry Pi, with L76K Module, Sucker Antenna and GPS Antenna, Suitable for HF band, for LoRaWAN Networks Building
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
[SX1262 868/915M LoRaWAN/GNSS HAT]Suitable for HF band, comes with a magnetic CB antenna, a GPS antenna and IPEX adapter cables (2PCS)
This series of products are LoRa modules using the new generation of SX1262 RF chip, features higher power efficiency, longer communication distance and stronger anti-interference than SX1278. Suitable for Sub-GHz frequency band network, and is available in HF (850~930MHz) frequency band. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network
In addition to the basic LoRaWAN, it also onboards L76K module with GPS/BD support, provides accurate clock and location info for node module. Onboard button cell holder, supports ML1220 rechargeable cell(not included), for preserving ephemeris information and hot starts
Standard Pi 40PIN GPIO header, compatible with Raspberry Pi series boards. Onboard 4 LED indicators for module operating status
Provide complete supporting documentation manuals (C example programs and user manuals, etc.). Please contact our 24-hour customer service through 'buyer/seller message' to obtain relevant manuals
36,99 € SU AMAZON
hat raspberry pi
raspberry pi hat
raspberry lora hat
raspberry pi lora
raspberry pi ethernet hat
raspberry pi 4g hat
raspberry pi robot hat
raspberry pi sense hat
raspberry pi zero hat
sense hat raspberry pi