Raspberry Pi 4 Ups Hat
I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento:
20 gennaio 2025
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
46,99 € SU AMAZON
iiunius
UPS HAT (E) per Raspberry Pi 5/4B/3B+ Type-C Bi-Directional Fast Charging 5V 6A Output Pogo Pins Connector Supports 4× 21700 Li Batterie (NOT Included)
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Connettore Pogo pin: adotta il design del connettore del pogo, compatibile con Raspberry Pi 5/4B/3B+
Ricarica rapida bidirezionale: porta integrata di tipo C con ricarica rapida bidirezionale, supporta più ingressi di carica/protocolli di uscita come PD3.0, fino a 40 W di ricarica. Batteria a bordo IC per la lettura della tensione della batteria, corrente, potenza, capacità di ripresa e altri parametri
Comunicazione bus I2C: supporta la comunicazione bus I2C per monitorare lo stato operativo della porta di tipo C e delle batterie in tempo reale supporta 4 batterie 21700 Li (non incluse), maggiore capacità e durata della batteria
Chip buck ad alta potenza: chip buck integrato ad alta potenza per uscita stabile da 5 V 6 A. Supporta il display del livello della batteria sul sistema, facile da controllare lo stato operativo del HAT con risorse di sviluppo online e manuale (lingua italiana non garantita)
45,11 € SU AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.3 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 4 8GB/4GB/2GB/3B+/3B/2B
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Function】X728 V2.3 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 V2.3 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B09Z6CC262), or N300 Case (ASIN: B07WZXPR2W), P165-A (ASIN: B089CK12C6), P165-B (ASIN: B08N617L1J)
【Other Geekworm UPS Recommended】X703 ultra-compact ups (ASIN: B09HZXDN8S); X708 UPS (ASIN: B08DJ5YZ7M)
52,89 € SU AMAZON
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentatore UPS HAT, Supporto 18650 Caricabatteria Power Bank Power Management Scheda di espansione 5V per Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
UPS Plus è una nuova generazione di moduli di gestione dell'alimentazione UPS che supporta l'aggiornamento del firmware OTA e supporta l'RTC integrato.
Ci sono due chip INA219 a bordo per rilevare la tensione delle batterie e la tensione in uscita da UPS Plus a Raspberry Pi.
Compatibile con Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
La confezione include: 1 x UPS Plus per Raspberry Pi, 4 x M2.5 pilastri in rame, 4 x M2.5 viti, 4 x M2.5 stick di rame lungo, 4 x M2.5 dadi, 1 x schermo acrilico, 1 x istruzioni
Come usare, fare riferimento a wiki.52pi.com/index.php?title=EP-0136
48,57 € SU AMAZON
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs
【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
52,89 € SU AMAZON
Waveshare
Waveshare USB 3.2 Gen1 HUB HAT for Raspberry Pi 4 with 4X USB 3.2 Gen1 Ports Up to 5 Gbps Data Rate Support Driver-Free Plug and Play USB Capability Expansion Board
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
4x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1,Onboard external USB-C 5V DC power port, ensures more stable power supply
1x power indicator and 4x USB port indicators, easy to check the operating status
Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well,Comes with development resources and manual
26,99 € SU AMAZON
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
✅4x extended USB ports, compatible with USB 2.0 / 1.1
✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
16,15 € SU AMAZON
IBest
Power Over Ethernet Hat (B) Poe Hat for Raspberry Pi 4 B/3 B+,802.3af-Compliant,37V ~ 57V DC Input,5V 2.5A DC Input, Onboard 0.91" OLED for Monitoring Processor Temperature, IP Address
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Poe HAT with Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
PoE (Power Over Ethernet) capability，802.3af-compliant.Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins
Fully isolated switched-mode power supply (SMPS)
0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch.
30,65 € SU AMAZON
hat raspberry pi 4
raspberry pi 4 hat
raspberry pi 4 fan hat
raspberry pi ups hat
ups hat raspberry pi
raspberry pi 4 tv hat
raspberry pi 4 ups
ups raspberry pi 4
poe hat raspberry pi 4
raspberry pi 4 poe hat
#1 VINCITORE
