K1 Micro Swiss
I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento:
18 novembre 2024
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
74,99 € SU AMAZON
Micro-Swiss
Micro Swiss FlowTech™ Hardware Kit for Creality K1 / K1 Max
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
This is a spare hardware kit for FlowTech hotend
7,99 € SU AMAZON
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
26,99 € SU AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.4mm
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
18,99 € SU AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.6mm
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
18,99 € SU AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.8mm
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
12,29 € SU AMAZON
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1C
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
74,99 € SU AMAZON
Micro-Swiss
Micro Swiss M2549-06 Ugello
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating; twinClad XT is a nickel composite coating designed for very low friction
Orizzontale 0.6 mm
Offre uno dei più bassi coefficienti di attrito, meglio che il nickel con PTFE co-deposito
Questo rivestimento è anche molto resistente e resistente all'abrasione; se si lavora con fibra di carbonio abrasiva, acciaio inossidabile, legno pieno o qualsiasi altro filamento metallico, questo migliorerà notevolmente la vita del tuo ugello
17,42 € SU AMAZON
Micro-Swiss
Micro Swiss CM2™ - MK8 Nozzle - 0.6mm
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
26,99 € SU AMAZON
Micro-Swiss
Micro Swiss CM2™ - HighFlow 1.75 Nozzle - 0.4mm
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
26,99 € SU AMAZON
micro swiss k1
micro swiss
micro swiss creality k1 hotend
hotend micro swiss
micro swiss flowtech
micro swiss hotend
micro swiss m3213
micro swiss nozzle
swiss tech micro
micro swiss extruder
#1 VINCITORE
