Elrs Receiver 2.4
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
5 febbraio 2025
BETAFPV
BETAFPV ELRS 2.4GHz Micro Receiver Support 5 CH PWM Outputs Failsafe Function with IPEX MHF T Antenna Compatible for Multirotors Fixed-Wing Helicopters RC Cars Boats Easy to Install Plug and Play
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【PWM Output】BETAFPV ELRS Micro receiver is the first ELRS receiver with PWM output on BETAFPV. Supports 5 channels PWM outputs. It also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX
【Application】ELRS micro receiver adapts for multiple types of models like fixed-wing, helicopters, RC cars, boats and etc.
【Failsafe Function】When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing
【Weight&Size】Weighing about 4.5g with an antenna and with the sizes of 19mm*32mm*9mm (without antenna). It means that an FPV drone can not afford to carry.
【Plug &Play】With the plug-and-play connect ports, micro receiver is very easy to use and does not need to solder
16,99 € SU AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Performance】Ultralight ELRS Lite receiver has a 2.4GHz Flat SMD ceramic antenna. A solid flat antenna without irregular parts can withstand crashes, making the receiver not so fragile. Perform well in control, range and stability, bringing a good flight experience to pilots
【Weight&Size】New lite receiver with a flat antenna features a 3mm extra-thin board and 0.53g lightweight, which requires less assembly space on drones with limited space
【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance
【ExpressLRS Lite Receiver】BETAFPV ELRS Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications that aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module, etc
【Configuration & Bind】The Lite receiver comes with officially major release V1.1.0 protocol and no Binding Phrase included. Lite receiver could enter binding status by power on/off three times
16,99 € SU AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Ricevitore Prestazioni a Lungo Raggio ad Alta Frequenza di Aggiornamento per Drone da Corsa FPV
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【ExpressLRS 】ExpressLRS è un link RC aperto a source per applicazioni RC, basato su Semtech Lora SX127x o SX1280 hardware per RX e TX Recectively. Questo rende ExpressLRS uno dei più rapidi RC disponibili a sinistra e offre prestazioni di lunga .
【Il ricevitore ExpressLRS】BETAFPV Nano Receiver è basato sul projececect ExpressLRS, un link a source RC per applicazioni RC che consentono di ottenere le migliori prestazioni di collegamento possibili in entrambe le velocità, latenza e gamma per moduli ELRS TX o Nano Bay, ecc.
【Crossfire Serial Protocol】ExpressLRS utilizza il protocollo seriale Crossfire (protocollo AKA CRSF ) per comunicare tra il ricevitore e la scheda di controllo del volo. In questo modo la scheda di controllo del volante supporta il protocollo seriale CRSF. Come impostare il protocollo CRSF può essere visto sul manuale (lingua italiana non ).
【Nano Size】questo ricevitore ha solo 0,7 grammi e il volume è di 12 mm x 19 mm, molto adatto per bambini perché sono ultra leggeri e nano.
【Configuration & Bind】 Nano receiver could enter binding status by power on/off three times. Step: Plugin and unplug nano receiver three times; Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode; Make sure the RF TX module or radio transmitter enter binding status, which sends out a binding pulse; If the receiver has a solid light, it's bound.
22,99 € SU AMAZON
SPEEDY BEE
Ricevitore FPV SpeedyBee ELRS - 2,4 ghz ExpressLRS Nano Receiver Drone RX Module con antenna UFL T da 78mm per drone FPV Tiny Whoop ad ala fissa RC Plane
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Per gare FPV o a lungo raggio. Adatto per Whoops, droni e modelli ad ala fissa.
Design ottimizzato del PCB per una migliore dissipazione del calore.
Diversità dell'antenna per una migliore stabilità e portata del segnale.
31,99 € SU AMAZON
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual Receiver Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【TXCO Tech】SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
【Dual RF Receiver Chains】SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
【Two Dipole T Antennas】SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
【Compatible Products】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks
【Ultralight Weight】 Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
28,99 € SU AMAZON
CENPEK
CENPEK Potente Ricevitore ELRS Nano RX24 2.4G per droni RC FPV
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Sblocca nuove capacità di navigazione a lunga distanza con elevata frequenza di aggiornamento e ricezione sensibile
Architettura open source per aggiornamenti firmware e facile accesso tramite WIFI
Costruzione durevole e affidabile con circuito PA integrato
Bella fattura e design elegante
Compatibile con vari modelli e facile da installare
18,99 € SU AMAZON
RADIOMASTER
RadioMaster RP1 2.4ghz ExpressLRS ELRS Nano Ricevitore
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
La serie di ricevitori RadioMaster RP è progettata pensando a dimensioni, facilità d'uso e gamma. Utilizzando il firmware open source ExpressLRS 2.4ghz, la serie RP di nano ricevitori offre funzionalità e gamma oggi i piloti si aspettano.
Sviluppato attorno al chip RF ESP8285 MCU e SX1280IMLTRT, la serie RP offre collegamenti RF Lora e FLRC 2.4ghz che offrono un'incredibile gamma e bassa latenza. Con Wifi integrato in FW gli aggiornamenti possono essere eseguiti sul tuo mestiere senza la necessità di rimuovere il ricevitore. Il legame può essere fatto usando una frase di associazione che significa che non più spine di legare o premere i pulsanti violenti mentre si tenta di collegare la batteria.
Di dimensioni minuscole ma grandi per le funzionalità e la gamma di ricevitori RP hai coperto.
Cosa c'è di nuovo sull'RP1 1. Il design PCB migliorato è migliore per la dissipazione del calore. 2. Antenna rigida con maggiore durata e prestazioni. 3. I cuscinetti per saldatura sono migliorati e più facili da saldare. 4.LED sul lato superiore del PCB.
Gamma di frequenza: da 2400 MHz a 2480 MHz Massima frequenza di aggiornamento di ricezione: 500Hz / F1000Hz
30,00 € SU AMAZON
zwxqe
ELRS Receiver, 915Mhz ExpressLRS Receiver, 2.4 GHz ELRS Receiver, High Refresh Rate Receiver, Long Range Receiver, T Type Antenna Signal Receiver, Racing Quadcopter Receiver, ExpressLRS Receiver
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
High-Performance ELRS Receiver: The ELRS Receiver operates at 915Mhz and 2.4GHz frequencies, ensuring high refresh rates and seamless communication with your drone. It provides an excellent signal reception for long-range racing and FPV drone activities
Long Range and Stable Signal: Designed for optimal long-range , this receiver stable performance with a T-type antenna that improves the signal quality, even at extended distances, making it perfect for racing quadcopters and FPV drones
Supports WiFi Upgrade: This receiver is WiFi-upgradeable, allowing you to easily update its firmware and features using WiFi, ensuring that your receiver is always up to date with the latest technology and providing enhanced performance
Ideal for Racing Quadcopters: Built with a on high-speed and precision, this ELRS receiver is ideal for racing quadcopters, ensuring minimal latency and high refresh rates for competitive racing and immersive FPV experiences
Compact and Easy to Integrate: The compact design of this receiver makes it easy to integrate into any drone setup, providing excellent performance without taking up much space. Perfect for hobbyists and competitive drone racers alike
21,89 € SU AMAZON
Bsbkoj
Elrs Receiver, 915mhz Expresslrs Receiver, 2.4ghz Elrs Receiver, Long Range Receiver, T-Type Antenna Receiver, Racing Quadcopter Receiver, High Refresh Rate Receiver, Expresslrs Receiver for Drones
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Double Frequency Support: The ELRS Receiver operates on both 915MHz and 2.4GHz frequencies, offering flexibility for different environments and ensuring stable connectivity for various racing quadcopters. This feature helps enhance the range and reliability of the receiver in challenging conditions.
High Refresh Rate for Racing: With a high refresh rate, this receiver ensures ultra-responsive control for fast-paced racing. It minimizes lag and real-time, precise communication between your transmitter and quadcopter, making it perfect for racing and competitive flying.
Long Range Performance: Designed for long-range use, the ELRS receiver delivers extended signal strength, allowing your racing quadcopter to perform well over vast distances. Whether you're flying through large tracks or in expansive outdoor areas, this receiver ensures strong and consistent connectivity.
T-Type Antenna for Improved Signal: Equipped with a T-type antenna, the receiver provides enhanced signal reception and transmission. The antenna design minimizes interference, ensuring that your signal stays strong even in environments with potential obstacles.
WiFi Upgrade Support: This receiver supports WiFi upgrades, providing the ability to improve firmware and features remotely for a seamless user experience. The ability to update the receiver over WiFi enhances its future-proof nature, keeping it compatible with the latest technologies in drone racing.
21,89 € SU AMAZON
Bsbkoj
Elrs Receiver, 915 MHz Expresslrs Receiver, 2,4 Ghz Elrs Receiver, Long Range Receiver, T-Type Antenna Receiver, Racing Quadcopter Receiver, High Refresh Rate Receiver, Expresslrs Receiver for Drones
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Doppia frequenza: The ELRS Receiver operates on both 915MHz and 2.4GHz frequencies, offering flexibility for different environments and ensuring stable connectivity for various racing quadcopters. Questa funzione aiuta a migliorare la gamma e la affidabilità della ricezione in condizioni di sfida.
High Refresh Rate for Racing: With a high refresh rate, this receiver ensures ultra-responsive control for fast-paced racing. It minimizes lag and real-time, precise communications between your transmitter and quadcopter, making it perfect for racing and competitive flying.
Long Range Performance: Designed for long range use, the ELRS receiver delivers extended signal strength, allowing your racing quadcopter to perform well over vast distances. Whether you 're flying through large tracks or in expansive outdoor areas, this receiver ensures strong and consistent connectivity.
T-Type Antenna for Improved Signal: Equipped with a T-type antenna, the receiver provides enhanced signal reception and transmission sion. L'antenna design minimizes interference, ensuring that your signal stays strong even in environments with potenzial barriere.
Supporto di aggiornamento WiFi: questo ricevitore supporti WiFi upgrades, providing the ability to improve firmware and features remotely for a seamless user experience. The ability to update the receiver over WiFi enhances its future-proof nature, keeping it compatible with the latest technologies in drone racing.
22,67 € SU AMAZON
elrs 2.4
elrs 2.4 modulo
ricevente elrs 2.4
radiomaster elrs 2.4
betafpv elrs 2.4 modulo
betafpv elrs 2.4 tx
betafpv elrs 2.4 rx
elrs receiver
#1 VINCITORE
