main logo

Eink Display Touch

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 15 aprile 2025
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 35,19 € SU AMAZON
Waveshare
Waveshare
2.9 pollici E-Paper E-Ink Touch Display per Raspberry Pi Pico 296×128 Due Colori Touch epaper Display Modulo Supporto Touch a 5 Punti Aggiornamento Parziale 3.3V Interfaccia SPI/I2C
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • 2.9 inch Touch e-Paper Module for Raspberry Pi Pico, 296×128 resolution, black / white E-Ink display, onboard female pin header for direct attaching to Raspberry Pi Pico
  • 2.9 inch capacitive touch ePaper module support 5-points touch, toughened glass touch panel, user-defined wakeup gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI Communication / I2C Touch Port interface, requires minimal IO pins
  • 31,55 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 "Tocco E-Paper E-Ink Display HAT Per Raspberry Pi 5 punti Touch capacitivo 296 × 128 pixel in bianco e nero Supporto Aggiornamento parziale Interfaccia SPI
Spedizione gratuita
star

95

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Modulo ePaper capacitivo da 2,9 pollici, risoluzione 296 × 128. Supporto touch a 5 punti, gesto di sveglia definito dall'utente.
  • Nessuna retroilluminazione, continua a visualizzare l'ultimo contenuto per un lungo periodo di tempo anche quando si spegne.
  • Consumo energetico ultra basso, praticamente l'alimentazione è necessaria solo per rinfrescare.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi.
  • Interfaccia di controllo invertita, per il collegamento con schede controller come STM32, ecc. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi).
  • 36,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display HAT for Raspberry Pi Black/White Color 250×122 Pixels, Support Partial/Full Refresh 5-Point Capacitive Touch with SPI Interface
star

86

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels,Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down,Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • 31,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 3.52inch e-Paper Display (B), e-Ink Display, 360x240, Red/Black/White, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico, Support Jetson Nano/TX2/Xavier N/Orin and RDK X3
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 29,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
  • A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson serie Nano
  • Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
  • 20,99 € SU AMAZON
IBest
IBest
IBest 2.13inch Touch e-Paper HAT 250×122 Pixels White Black Two Color E-Ink Display epaper Screen for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,SPI Interface,Support Partial Refresh
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels.Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 32,90 € SU AMAZON
Coolwell
Coolwell
Coolwell 2.13inch Touch E-Paper E-Ink Display Module For Raspberry Pi Zero/Zero W, with ABS Protection Case, 5-point Touch,250×122 Pixels
star

64

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels
  • Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • 35,51 € SU AMAZON
eink touch display eink display display touch touch display eink display hdmi eink display raspberry eink display big eink display esp32 esp32 eink display eink display wifi