Display 4.3 Inch
I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento:
11 aprile 2025
CLICLED
CLICLED Monitor TFT LCD da 4.3" regolabile display per retromarcia auto parcheggio 043
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Monitor da 4.3 pollici, grazie al quale avrete sempre una visione chiara e nitida delle immagini trasmesse dalla telecamera di retromarcia o da una semplice telecamera da videosorveglianza
Monitor 4.3" TFT LCD a colori
Ingressi video RCA, Dimensioni: l 10.8 cm x h 9 cm x s 3 cm circa
Alimentazione: 12V, Peso: 190 g circa
Alimentazione direttamente collegabile alla batteria
Display inclinabile
Sistema compatibile PAL/NTSC
Collegamento RCA
Ideale per telecamere retromarcia
La confezione contiene: Nr. 1 Monitor 4.3" TFT Nr. 1 Cavo alimentazione
14,98 € SU AMAZON
Waveshare
Waveshare 4.3 pollici DSI LCD Display per Raspberry Pi 4B, 800×480 IPS Schermo Monitor Capacitivo Touchscreen con Custodia, Supporta Raspbian/Ubuntu/Kali / WIN10 IoT
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
4.3inch capacitive touch display for Raspberry Pi 4B, IPS screen with protection case, 800x480 hardware resolution, wide angle, toughened glass panel
MIPI DSI interface, refresh rate up to 60Hz
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
49,49 € SU AMAZON
Waveshare
Waveshare 4.3inch LCD Capacitive Touch Display for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+ 800×480 IPS Wide Angle MIPI DSI Interface Screen
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Supports Raspbian, 5-points touch, driver free.
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
Supports Retropie, driver free.
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+ (CM3/3+ requires extra adapter board).
up to 5-points touch, depending on the operating system.
44,99 € SU AMAZON
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board B, 800×480 Resolution, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, 240MHz Frequency, with Onboard Antenna and Plastic Case
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
This version comes with a plastic case. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLT 5 (LE), with onboard antenna
Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
Onboard voltage regulator, supports 7~36V wide range power supply. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
Supports passive and active digital input, with bi-directional optocoupler isolation. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current
Onboard LED indicators for indicating the power and battery recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
60,99 € SU AMAZON
IBest
4.3inch DSI LCD Capacitive Touch Screen Display 800×480 Resolution IPS Wide Angle Monitor for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, Supports Ubuntu/Kali / WIN10 IoT
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
800x480 resolution 4.3inch IPS screen,IPS Wide Angle, MIPI DSI Interface
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+. Another adapter board is required for CM3/3+
Capacitive touch panel, support 5-point touch
DSI interface, refresh rate up to 60Hz.
Supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver free.
44,85 € SU AMAZON
LUCKFOX
LUCKFOX for Raspberry Pi 5 Touch Screen - 4.3 inch DSI Display for Pi 5/4B/CM4/CM3 Support 3D Printing, Capacitive Touch 800x480, 178° Viewing Angle, Toughened Glass LCD Panel for Raspberry Display
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
- [ High-Quality Construction & Rich Accessories ] Made with toughened glass, this 800 x 480 resolution for raspberry pi 4.3 inch display is designed to withstand daily use and provide long-lasting durability. This for raspberry display 4.3 inch dsi touchscreen is easy to install as the drive board is pre-installed for you. The package also comes with the necessary accessories that can help start and run your PI in just a few minutes
- [ High Compatibility & Multiple Uses ] Easy signal input for seamless compatibility with Core 3566/Raspberry Pi 5/Raspberry Pi 4B/Raspberry Pi 3B+/Raspberry Pi 3A+/CM3/CM4/VisionFive2/Tinker Board, etc. This for raspberry pi touchscreen is ideal for most Pi projects & music streaming applications. This touch LCD screen can be used as a weather station display for RPI
- [ Stunning IPS Display & Easy Brightness Adjustment ] Featuring an IPS display panel, the 178°wide viewing angle ensures vibrant visuals. Also, the brightness adjustment range of this for raspberry pi 4.3" touch screen display is wide and can be adjusted to 0. It can be easily controlled via Python or other software, mading it more convenient to control this Pi screen and effectively save power and ensuring optimal viewing under any lighting conditions
- [ Capacitive 5-Point Touch & Low-power Consumption ] With capacitive touch control panel, smooth touch response is achievable, which enhance your interaction with this touch display. LUCKFOX DSI capacitive 4.3 inch touch screen has an independent power interface and will not occupy GPIO. Your Pi can be directly installed on the back of the screen for easy experimentation. This 4.3inch LCD display small supports DSI “one-cable connection”, no need for additional power supply, drive-free
- [ Versatile Integration & Light Weight ] LUCKFOX for raspberry pi screen 4.3 inch DSI displays are ideal for project with specific requirement for low power consumption, small size, and Pi integration, like embedded systems, portable devices, etc. Whether you want to create tablet computer, infotainment system, independent device, or embedded project, this for raspberry pi 4.3-inch touch screen display opens up endless possibilities
38,99 € SU AMAZON
EZVIZ
EZVIZ CP4 Spioncino Digitale a Batteria 1080p, Video Spioncino Senza Fili con Display Touchscreen da 4,3" Pollici, Suoneria Campanello Integrata, Visione Notturna, Rilevamento Movimento PIR
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Touch Screen a 1080P da 4.3" pollici】Lo spioncino CP4 è dotato di uno schermo ad alta risoluzione 1080p da 4.3 pollici per il lato interno della porta di casa, per vedere chi c'è fuori e tutte le condizioni esterne sul grande schermo.
【Rilevamento intelligente PIR & Notifiche 24/7】Grazie al sensore di movimento PIR incorporato per il rilevamento intelligente delle persone, quando attiva il rilevamento, il tuo telefono riceverà una notifica push dalla EZVIZ APP. Quando qualcuno suona il campanello, CP4 ti garantisce di ricevere immediatamente una video chiamata da eventuali visitatori della porta principale.
【Visione chiara giorno e notte】Funzione di visione notturna a infrarossi automatica, sfrutta la visione notturna nitida degli oggetti fino a 5 metri di distanza per avere tutto sotto controllo, giorno e notte: lo spioncino CP4 passa automaticamente dalla modalità giorno a quella notte, in base alla luce ambientale.
【Protezione di lunga durata】Grazie alla batteria al litio ricaricabile integrata da 4.600 mAh, lo spioncino CP4 offre una lunga autonomia con un consumo energetico minimo.
【Voice changer & Suonerie multiple】Con il campanello incorporato, CP4 offre diverse suonerie a scelta. La funzione di cammuffamento voce consente di rimanere non identificabili alle orecchie di un estraneo.
【Telecamera di sorveglianza grandangolare a 166°】Design grandangolare, massimizza la protezione della vostra sicurezza a casa. Per vedere tutto all'esterno con una visione a 166°. Mantieni la tua famiglia al sicuro prima di aprire la porta quando qualcuno colpisce la porta.
163,99 € SU AMAZON
LUCKFOX
LUCKFOX 4.3inch Capacitive Touchscreen, 60Hz LCD Screen(800 x 480 Pixel) for Raspberry Pi, 160° Wide-Angle Low-Power IPS Screen, with MIPI DSI Interface, Suitable for Various Projects
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
4.3 inch tempered glass capacitive touch panel, with hardness up to 6H, supports backlight brightness adjustment through software. Convenient monitor for Raspberry Pi
Drive the LCD directly via the DSI interface of Pi, the refresh rate can reach 60Hz. A high-quality touchscreen for Raspberry Pi
Compatible with raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, for some CM3/3+/4 expansion boards need additional DSI-Cable-15cm adapter
When used for Raspberry Pi, it is compatible with Raspbian (5-point touch, drive free); Compatible with Ubuntu/Kali/WIN10 IoT (single touch, drive free); Compatible with Retropie (drive free)
Using 5V power supply, the maximum brightness working current is about 250mA, and the minimum brightness working current is about 150mA. The overall height is 12.7mm.(The screen thickness is 8.7mm and the standoffs is 4mm)
39,99 € SU AMAZON
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Support WiFi, for Esphome/Home Assistant
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL
Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 BLE, with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
43,99 € SU AMAZON
IBest
IBest 4.3inch HDMI LCD (B) Capacitive Touch Screen Monitor 800x480 IPS Display for Raspberry Pi, Jetson Nano,Beaglebone Black, Banana Pi, PC Support Windows 10 8.1 8 7
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
4.3 inch IPS screen capacitive touch display,800x480 hardware resolution, configurable by software (up to 1920x1080),HDMI interface
Supports popular mini PCs such as Raspberry Pi 4 3 2 1 Series Model, Jetson Nano, BB Black, Banana Pi, as well as general desktop computers
When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free;When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
3.5mm audio jack, speaker connector, supports HDMI audio output
58,95 € SU AMAZON
4 inch display
3/4 inch
3.5 inch display
display nokia 3.4
nokia 3.4 display
nextion display 4.3
smartphone display 4.3
tft display 4.3
3 display
3 inch
#1 VINCITORE
