main logo

Arduino Eink

I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento: 13 novembre 2024
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller Partial refresh for Raspberry Pi/Jetson Nano/Arduino,Support SPI Interface
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 1.54 inch E-Paper Screen Display Module 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 19,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Flexible E-Ink Raw Display Without PCB 212x104 Black/White Dual-Color E-Paper SPI Interface Supports Partial Refresh for Raspberry Pi/Arduino/STM32
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • This is a flexible E-Ink raw display, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Down wiki: www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(D)
  • 12,95 € SU AMAZON
Waveshare
Waveshare
2.13 inch E-Paper Display Hat (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € SU AMAZON
Waveshare
Waveshare
2.13 Pollici E-Ink HAT Nero Bianco Rosso Giallo 4-Color E-Paper Display per Arduino/Raspberry Pi/Jetson Nano/STM32, Risoluzione 250x122 Pixel, Comunicazione SPI, Compatibile con MCU da 3.3V/5V
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • 2.13inch E-Paper HAT, red/yellow/black/white display color, 250×122 resolution, wide viewing angle, low power consumption, basically power is only required for refreshing
  • 2.13inch E-Ink display module onboard 3-wire / 4-wire SPI interface and Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi Zero W/Zero 2 W/Zero WH/4B/3B+/3B/2B, Arduino, Jetson Nano, STM32, etc. controller boards
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • No backlight, paper-like effect without electricity, keeps displaying last content for a long time even when power down
  • Provide online development resources and manual, examples for Raspberry Pi/Jetson Nano/Arduino/STM32 etc.
  • 24,99 € SU AMAZON
xicoolee
xicoolee
Display E-Ink da 2,13 pollici, compatibile con Raspberry Pi/Arduino, 250 x 122 Resolution RBW E-Paper Screen for Digital Labels, Industrial Instruments, and Conference Tags
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Display a tre colori con risoluzione da 250 x 122 cm: questo display e-ink da 2,13 pollici offre contenuto rosso, nero e bianco con risoluzione 250 x 122, ideale per etichette elettroniche, tag nome conferenze e bacheche.
  • Interfaccia SPI e aggiornamento parziale per un'integrazione senza cuciture: lo schermo RBW e-paper presenta un'interfaccia di comunicazione SPI e supporta un aggiornamento parziale, consente di aggiornare quasi tutti gli aggiornamenti per etichette logistiche, segnaletiche digitali e attrezzature industriali.
  • Consumo di energia ultra basso per un uso ecologico: la potenza è solo trascinata durante i cicli di aggiornamento, rendendo questo e-ink screen una soluzione di risparmio energetico per notebook, tag di prezzo ed e-reader.
  • Ampia gamma di angoli di visione: con un angolo di visione superiore a 170 gradi, questo display è progettato per la visibilità da più angoli, perfetto per segnaletica al dettaglio, etichette industriali e display di conferenza.
  • Schermo nudo per integrazione flessibile con microcontrollori: compatibile con Arduino, Raspberry Pi alternative e altre piattaforme microcontrollori, questo schermo e-paper consente agli sviluppatori di personalizzare i loro progetti. (Driver board sold separately.)
  • 12,52 € SU AMAZON
IBest
IBest
IBest 4.2inch E-paper Display Module 400x300 Resolution 3.3V-5V Two-Color E-Ink Display HAT epaper Screen for Raspberry Pi/Arduino/Nucleo Support Full Refresh,SPI Interface
Spedizione gratuita
star

73

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Ultra low power consumption, basically power is only required for refreshing
  • No backlight, keeps displaying last content for a long time even when power down
  • 44,15 € SU AMAZON
Waveshare
Waveshare
Waveshare 264x176 Resolution 2.7 Inch e-Paper Display HAT E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W/Arduino/STM32/Jetson Nano
Spedizione gratuita
star

64

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Onboard 4x Keys; Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download link: www.waveshare.com/wiki/2.7inch_e-Paper_HAT
  • 23,99 € SU AMAZON
eink display arduino